The Opal Kelly XEM8310-AU25P is a compact, mezzanine-style FPGA integration module featuring the AMD Artix UltraScale+ FPGA. The XEM8310 is supported by Opal Kelly’s FrontPanel SDK, enabling a new level of rapid prototype development and OEM product integration.

Documentation and Reference Materials

The following is a comprehensive list of documentation available for this device.

XEM8310 User’s ManualThis online documentation space.
XEM8310 Schematic (Login Required)Download the schematics in a PDF.
XEM8310 Pins ReferenceThe interactive Pins reference for the device provides detailed pinout
information as well as automated constraint file generation. Export
functionality is provided to PDF, CSV. Constraint files are provided
in XDC format for use in Vivado.
FrontPanel SDK User’s ManualThe online documentation space for the FrontPanel SDK.
FrontPanel API ReferenceOnline API reference with detailed usage for every API method.

Functional Block Diagram


The XEM8310 is offered in a single variant with the AU25P density and -2 speed grade Artix UltraScale+ FPGA. The table below briefly summarizes the key features of this FPGA. Please consult the AMD documentation for a more thorough comparison.

System Logic Cells308,437
CLB Flip-Flops282,000
CLB LUTs141,000
Max. Distributed RAM4.7 Mb
Block RAM300 blocks (10.5 Mb)
DSP Slices1,200
CMTs (1 MMCM + 2 PLLs)4
Max HP I/O77
Max HD I/O72
GTY Transceivers (16.375 Gb/s)12

SuperSpeed USB 3.0 Interface

The XEM8310 uses a Cypress FX3 USB microcontroller to make the XEM a USB 3.0 peripheral. As a USB peripheral, the XEM is instantly recognized as a plug and play peripheral on millions of PCs. More importantly, FPGA downloads to the XEM happen quickly, virtual instruments under FrontPanel update quickly, and data transfers are blazingly fast.

On-board Peripherals

The XEM8310 is designed to compactly support a large number of applications with a small number of on-board peripherals. These peripherals are listed below.

Low-Jitter Crystal Oscillators

The following fixed-frequency low-jitter oscillators are included on-board with direct connections to the FPGA:

  • 100 MHz for FPGA fabric
  • 125 MHz for FPGA transceiver reference

All oscillators route their LVDS clock to the FPGA. The Artix UltraScale+ FPGA can produce a wide range of clock frequencies using the on-chip MMCM capabilities.

2-GiByte Word-Wide DDR4 Synchronous DRAM

The module also includes 2-GiByte DDR4 SDRAM with a 32-bit wide interface to the FPGA. This SDRAM is attached exclusively to the FPGA. The maximum data rate of the SDRAM is 2666 Mb/s, although the -2 speed grade of the Artix UltraScale+ FPGA supports a maximum data rate of 2400 Mb/s. This gives a supported peak memory bandwidth of 76.8 Gb/s.

FPGA Flash – 256 MiB QPSI Flash Memory

A 256 Mib serial flash device provides on-board non-volatile storage for the FPGA including fast boot capability. This device is attached directly to the FPGA for use in your design.

System Flash – 128 MiB Serial Flash Memory

A 128 Mib serial flash device provides on-board non-volatile storage accessible to the USB microcontroller. This device is used to store device firmware and configuration settings as well as other user assets such calibration data. Erase, read, and write functions are available at all times (with or without a configured FPGA) through the use of FrontPanel API methods.


Four LEDs are available for general use as indicators.

FrontPanel Support

The XEM8310 is fully supported by Opal Kelly’s FrontPanel Application. FrontPanel augments the limited peripheral support with a host of PC-based virtual instruments such as LEDs, hex displays, pushbuttons, toggle buttons, and so on. Essentially, this makes your PC a reconfigurable I/O board and adds tremendous value to the XEM8310 as an experimentation or prototyping system.

Programmer’s Interface

In addition to complete support within FrontPanel, the XEM8310 is also fully supported by the FrontPanel SDK, a powerful C++ class library available to Windows, Mac OS X, and Linux programmers allowing you to easily interface your own software to the XEM.

In addition to the C++ library, wrappers have been written for C#, Java, and Python making the API available under those languages as well. Sample wrappers (unsupported) are also provided for Matlab and LabVIEW.

Complete documentation and several sample programs are installed with FrontPanel.


Software, documentation, samples, and related materials are Copyright © 2006-2022 Opal Kelly Incorporated.

Opal Kelly Incorporated
Portland, OR 

All rights reserved. Unauthorized duplication, in whole or part, of this document by any means except for brief excerpts in published reviews is prohibited without the express written permission of Opal Kelly Incorporated.

Opal Kelly® and FrontPanel® are registered trademarks of Opal Kelly Incorporated. Linux is a registered trademark of Linus Torvalds. Microsoft and Windows are both registered trademarks of Microsoft Corporation. All other trademarks referenced herein are the property of their respective owners and no trademark rights are claimed.