|Host Interface||USB 2.0, Type C|
UART (Mini USB-B)
|Memory||1 GiByte DDR3, 32-bit wide data interface|
|NV Memory||Micro SD card slot|
|SoC Oscillator||Fixed, 50 MHz|
|DC Input Ripple||–||–||50||mVp-p|
|Oscillator Frequency (Fixed)||–||50||–||MHz|
|Oscillator Period Jitter||5||ps|
The Brain-1 PCB is 115mm x 75mm with four mounting holes (M2 metric screws) spaced as shown in the drawing below. These mounting holes are electrically isolated from all signals on the Brain-1.
The Brain-1 has three SYZYGY standard ports and one SYZYGY transceiver port. All port connectors are on the top side of the PCB.
The mechanical drawing below may be used for enclosure or mounting hardware design. 3D Models are also available in SolidWorks, STEP, and IGES formats.