ZEM5305
Specifications
| Host Interface | USB 3.0 Micro B, SuperSpeed FrontPanel Support |
| FPGA | 5CEFA2U19 |
| Memory | 512 MiByte DDR3, 16-bit wide data interface |
| NV Memory | 16 MiB System Flash |
| Oscillator | 100 MHz |
| FPGA I/O Voltage | See Powering the ZEM5305 |
| MINIMUM | TYPICAL | MAXIMUM | UNITS | |
|---|---|---|---|---|
| DC Input | +4.5 | +5.0 | +5.5 | VDC |
| DC Input Ripple | – | – | 50 | mVp-p |
| Operating Temperature | 0 | – | +70 | ºC |
| Storage Temperature | -50 | 0 | +100 | ºC |
| Weight | 16 | grams | ||
| Oscillator Frequency | 100 | MHz | ||
| Oscillator Freq. Stability | ±50 | ppm | ||
| Oscillator Period Jitter | 2.5 | ps RMS |
Mechanical Drawing
The mechanical drawing below may be used for enclosure or mounting hardware design. 3D Models are also available in SolidWorks, STEP, and IGES formats.
Mating Board Diagram
Use the mating diagram below to orient and design peripheral mating hardware. Note that this is a top-down view and mates to the top of the ZEM5305. This design is realized in Altium CAD drawings in the corresponding breakout board which are available through Pins Downloads.
For Samtec connector details, drawings, models, and landing patterns, please visit Samtec’s website.
