XEM7320
Specifications
| Host Interface | USB 3.0 Type C, SuperSpeed FrontPanel Support |
| FPGA | XC7A75T-1FGG484 XC7A200T-1FBG484 available on special order |
| Memory | 1 GiByte DDR3, 32-bit wide data interface |
| NV Memory | 16 MiB System Flash 16 MiB FPGA Flash |
| Oscillator | 200 MHz |
| MINIMUM | TYPICAL | MAXIMUM | UNITS | |
|---|---|---|---|---|
| DC Input | +4.5 | – | +18.0 | VDC |
| DC Input Ripple | – | – | 50 | mVp-p |
| Operating Temperature | 0 | – | +70 | ºC |
| Storage Temperature | -50 | 0 | +100 | ºC |
| Weight | 47 | grams | ||
| Oscillator Frequency | 200 | MHz | ||
| Oscillator Freq. Stability | ±50 | ppm | ||
| Oscillator Period Jitter | 2.5 | ps RMS |
PCB Footprint
The PCB is 105mm x 70mm with four mounting holes (M2 metric screws) spaced as shown in the figures below. These mounting holes are electrically isolated from all signals on the XEM7320.
The XEM7320 has two SYZYGY standard connectors along one edge on the top side and one SYZYGY transceiver connector along the opposing edge, also on the top side.
Mechanical Drawing
BRK-STD Mechanical Drawing
BRK-TXR Mechanical Drawing
