The JTAG connections on the FPGA are wired directly to a dedicated 2mm header (J2) compatible with the Xilinx JTAG cable. The JTAG interface presented at J2 is a 1.8v interface corresponding to the FPGA JTAG I/O voltage.

FPGA XADC signals are available on a dedicated, non-populated 4-pin header at J3. The ADC signals are filtered through a simple RC network.

The XADC uses the on-chip reference option which is selected by connecting VREFP and VREFN to
ADCGND.

Below we show the XADC connections to the Artix-7 Configuration bank: