|Host Interface||USB 2.0 Type B|
|NV Memory||4 MiB System Flash (FPGA attached)|
|Oscillator||Programmable, 0.08-200 MHz|
|FPGA I/O Voltage||+3.3V (Fixed)|
|DC Input (USB VBUS)||+4.5||+5.0||+5.5||VDC|
|DC Input Ripple (USB VBUS)||–||–||50||mVp-p|
|Oscillator Period Jitter||250||ps pk-pk|
The XEM6001 PCB is 3.5” x 2.0” (88.9mm x 50.8mm) with four mounting holes spaced as shown in the figures below. These mounting holes are electrically isolated (disconnected).
The three FPGA-access ports JP1, JP2, and JP3 are located on a 0.1” grid so that the entire board may be attached to a standard prototyping board. The JTAG header JP4 is also on this grid.