Skip to end of metadata
Go to start of metadata

The JTAG connections on the FPGA are wired directly to the expansion connector MC1 on the XEM8350 to facilitate FPGA configuration and ChipScope usage using a Xilinx JTAG cable. The JTAG interface presented at MC1 is a 1.8v interface corresponding to the FPGA JTAG I/O voltage. An appropriate connector (such as a 2mm connector compatible with the Xilinx JTAG cable) would need to be wired on the peripheral attached to the XEM8350. Our BRK8350 has this connector and may be used as a reference.

 

 

Adaptavist ThemeBuilder EngineAtlassian Confluence